Clean Coal Technology

2014, v.20;No.93(05) 36-39

[Print This Page] [Close]
Current Issue | Archive | Advanced Search

Pipeline transportation experiments of Shenfu coal water mixture

ZHANG Shengju;DUAN Qingbing;HE Guofeng;LIU Yewei;SUN Haiyong;

Abstract:

To obtain the optimum Shenfu coal water mixture( CWM) pipeline transportation parameters,the CWM rheology test was conducted to determine its critical shear rate. Through the relationship between the shear rate and shear stress of Shenfu CWM determined its rheology model,fitted the mathematical equation which was suitable for Shenfu CWM. Under different pipe diameters and CWM concentration,investigated the influence of CWM average rate on pipeline pressure loss,obtained the optimum CWM pipeline transportation parameters. The results show that the critical shear rate of CWM is 40. 74 s-1,the fitting rheological equation follows the bingham plastic model.The pipeline is more suitable for low concentration and low viscosity CWM. Keep the average flow velocity of CWM unchanging,the smaller the pipe diameter,the bigger the pipeline pressure loss. When the pipe diameter ranges from 200 mm to 300 mm,the pipeline pressure loss meets the demands of industrial application.

Key Words: coal water mixture(CWM);pipeline transportation;transportation properties;rheological property;bingham plastic model;pressure loss

Abstract:

Keywords:

Foundation: 国家科技部科研院所技术开发专项资助项目(2011EG222214)

Authors: ZHANG Shengju;DUAN Qingbing;HE Guofeng;LIU Yewei;SUN Haiyong;

DOI: 10.13226/j.issn.1006-6772.2014.05.009

Accessibility
Information
Service
Key Words
The author of this article
Cnki
Share