大型原点反共振振动筛的初步设计Preliminary design of large-scale origin antiresonant vibrating screen
马超,邵帅,吴腾健,王珊,赵祥镇雄,党梦飞,王新文
MA Chao,SHAO Shuai,WU Tengjian,WANG Shan,ZHAOXIANG Zhenxiong,DANG Mengfei,WANG Xinwen
摘要(Abstract):
针对传统大型振动筛筛箱侧帮易断裂,参振质量大,隔振效果差等问题,提出了将反共振理论用于振动筛的设计理念,建立了反共振振动筛的力学模型,并进行动力学分析,得到筛箱和下质体稳态时的响应振幅,通过绘制双质体系统的幅频特性曲线得到反共振振动筛的激振频率。利用Solidworks软件对反共振振动筛进行三维建模,完成了大型原点反共振振动筛的初步设计。结果表明:可调激振器位置的斜面设计使激振力通过上质体质心,保证了筛箱的正常工作。由圆柱形螺旋弹簧组成的弹簧座连接上、下质体及地面,保证了系统所需弹性系数;通过应用PID控制技术监控上下质体振幅,并改变激振频率来稳定上、下质体振幅,实现原点反共振振动筛振幅的稳定性控制。
The lateral wall of traditional large vibrating sieve box was easy to broke,the part of the vibration mass was high and vibration isolation effect was poor. To resolve the above problems,adopted the anti-resonance theory to design vibrating screen. The model of antiresonant vibrating screen was built,the motion equation of antiresonant vibrating screen was achieved. Worked out the amplitude of the steady-state response and the next screen box when it was plastid. Drawed a amplitude-frequency characteristic curve of the double mass system,and calculated out the excitation frequency of antiresonant vibrating screen when it was working. Achieved anti-resonance vibrating screen 3D model through Solidworks software,and complete preliminary design of the antiresonant vibrating screen. The results show that,the bevel on which the position of exciter can be adjusted allows the exciting force line go through the mass centroid. The design ensures the normal operation of the screen box. The spring seats which consist of cylindrical coil springs connect upper mass,lower mass and the ground,ensure the elasticity coefficient required by the system. The amplitude of the upper and lower mass can be monitored and controlled through proportion integration differentiation technology. The amplitude of origin antiresonant vibrating screen can be stabilized by changing the excitation frequency.
关键词(KeyWords):
反共振振动筛;隔振效果;激振频率;力学模型;Solidworks建模;振幅;上下质体
antiresonant vibrating screen;isolation effect;excitation frequency;mechanical model;Solidworks modeling;amplitude;the upper and lower mass
基金项目(Foundation):
作者(Author):
马超,邵帅,吴腾健,王珊,赵祥镇雄,党梦飞,王新文
MA Chao,SHAO Shuai,WU Tengjian,WANG Shan,ZHAOXIANG Zhenxiong,DANG Mengfei,WANG Xinwen
DOI: 10.13226/j.issn.1006-6772.2014.05.008
参考文献(References):
- [1]王新文,孙海洋,余训天,等.中国选煤厂脱介筛的应用现状[J].洁净煤技术,2013,19(3):10-13.
- [2]杨晨,李辉.反共振振动筛动力学参数的设计与应用[J].机械研究与应用,2013,26(4):96-99.
- [3]闻邦椿,刘凤翘.振动机械的理论及应用[M].北京:机械工业出版社,1982:199-265.
- [4]刘杰,孙光复.反共振振动机械的理论及应用[J].东北大学学报,1995,16(1):82-86.
- [5]刘杰,李允公,刘劲涛,等.基于振幅稳定的原点反共振振动机动力学分析及其控制[J].机械工程学报,2006,42(1):145-148.
- [6]刘劲涛,刘杰,李小号,等.反共振点位于两共振点正中间的反共振机参数选择[J].东北大学学报:自然科学版,2009,30(3):405-408.
- [7]Liu J,Sun G F,Tang B X,et al.Application of antiresonant theory in vibration utilization engineering[C]//Proceeding of ninth world congress on the theory of machine and mechanism.Milan:[s.n.],1995:1093-1097.
- [8]刘杰,侯祥林.反共振理论在减振技术中的应用[J].东北大学学报,1994,15(4):363-369.
- [9]闻邦椿,刘树英.振动机械的理论与动态设计方法[M].北京:机械工业出版社,2001.
- [10]刘劲涛,李小号,高洪波,等.单质体反共振隔振振动机械的理论及应用[J].东北大学学报:自然科学版,2011,32(5):724-727.
- [11]高洪波,赵波.反共振振动筛的动力学参数分析与优化[J].辽宁省交通高等专科学校学报:自然科学版,2005,7(4):40-42.
- [12]韩丽鹏.大型反共振振动筛设计及性能仿真[D].沈阳:东北大学,2008:1-29.
- [13]杨伟红,刘克铭,任兰柱,等.反共振离心脱水机隔振橡胶弹簧的动态特性研究[J].煤炭学报,2010,35(6):1028-1033.
- [14]闻邦椿,刘树英,陈照波,等.机械振动理论及应用[M].北京:高等教育出版社,2009:65-71.
- [15]李滨慧,高洪波,赵波,等.反共振振动筛的振幅稳定性控制[J].辽宁工程技术大学学报,2006,25(3):429-431.
- 反共振振动筛
- 隔振效果
- 激振频率
- 力学模型
- Solidworks建模
- 振幅
- 上下质体
antiresonant vibrating screen - isolation effect
- excitation frequency
- mechanical model
- Solidworks modeling
- amplitude
- the upper and lower mass