一种装车质量检测装置设计及评价方法Design and evaluation method of a loading quality inspection device
贺立明,李培齐,白龙,王斌
HE Liming,LI Peiqi,BAI Long,WANG Bin
摘要(Abstract)：
针对目前铁路运输粉状物料偏载和超高检测滞后,导致不能及时指导装车及人工观测车帮留煤不准确等问题,利用液压油缸控制检测架的高度,通过液压马达控制检测架的水平位置,采用5个在线激光测距仪检测装车物料上表面及车帮高度,对车顶表面进行建模分析,实现了对装车质量进行检测评价。通过分析煤炭密度间接反映煤炭发热量和煤炭堆密度,便于指导生产实际。
In view of the problems of the partial load of powdery materials in railway transportatio, lag of superelevation detection unable to guide the loading in time and the inaccuracy of coal left on the side of the car by manual observation, five on-line laser rangefinders were used to detect the upper surface of loading materials and the height of car side based on the height of the detection frame controlled by the hydraulic cylinder and the horizontal position of detection frame by the hydraulic motor, and the roof surface was modeled and analyzed.The detection and evaluation of loading quality were realized.Analysis of coal density indirectly reflects the calorific value and bulk density of coal, which is convenient to guide the actual production.
关键词(KeyWords)：
装车质量评价;铁路运输;超载;偏载;装车质量
evaluation of loading quality;railway transportation;overload;unbalanced loading;loading quality
基金项目(Foundation):
作者(Author):
贺立明,李培齐,白龙,王斌
HE Liming,LI Peiqi,BAI Long,WANG Bin
DOI: 10.13226/j.issn.1006-6772.S10091851
参考文献(References)：
- [1] 杜力.从煤炭长途超载运输探析运输结构与产业结构的关系[J].交通部管理干部学院学报，2008,18(4):18-20.
- [2] 高洁.防止装载机装车超载的对策[J].铁道货运，2013,31(1):54-56.
- [3] 谷宇.铁路货车超偏载检测装置日常典型问题维护[J].铁道技术监督，2011,39(11):20-21.
- [4] 王冬，王东才，范荣广.选煤厂铁路装车自动减载系统设计与应用[J].工矿自动化，2012,38(8):89-92.
- [5] 王治国.关于防止铁路超载运输问题的研究[C]//山东铁道学会.山东铁道学会铁路运输安全学术研讨论文集.济南：山东省科学技术协会，2011.
- [6] 贺建清，曾京.轻便型铁路货车超偏载检测装置[J].中国铁道科学，2010,31(6):137-140.
- [7] 冯亮.煤矿铁路装车系统自动化控制设计[J].自动化应用，2020(11):21-23.
- [8] 马延峰.自动定量装车系统机械改造方案设计[J].矿业装备，2019(5):156-157.